Connecting rod bearings Crank pin bearing
YAMAHA MT-09 (RN87) 2024- MATRIS KIT CARTUCCIA IDRAULICA F25SA fork type...
YAMAHA MT-09 (RN87) 2024- MATRIS FORK CARTRIDGE F25R fork type Kayaba...
YAMAHA MT-09 (RN87) 2024- KIT CARTUCCIA IDRAULICA COMPLETA MATRIS F20K...
YAMAHA MT-09 (RN87) 2024- MATRIS HYDRAULIC FORK KIT FRK fork type...
YAMAHA MT-09 (RN87) 2024- MATRIS SPRING AND PRELOAD KIT FKS fork type...
YAMAHA MT-09 (RN87) 2024- MONOSHOCK MATRIS SERIE M46KF+HP (P6K flex-knob...
YAMAHA MT-09 (RN87) 2024- MONOSHOCK MATRIS SERIE M46KF (standard preload...
YAMAHA MT-09 (RN87) 2024- MONOSHOCK MATRIS SERIE M46KD+HP (P6K flex-knob...
YAMAHA MT-09 (RN87) 2024- MONOSHOCK MATRIS SERIE M46KD (standard preload...
LANCIA DELTA INTEGRALE 16v - LANCIA DELTA EVOLUZIONE - LANCIA DELTA 4WD...
Mercedes E-Class Cabrio Pre-facelift...
Valve seat ringMill special sintered metal valve seat ring including assembly and valve seat. Very suitable for titanium valves. The valve seat inserts are specially made to measure.
PistonsCP - Forged pistons of the extra class 77.00 mm, compression 14.0: 1. The piston is supplied with matching piston rings, pins and clips. The cylinder must be re-honed with special diamond honing stones. The cylinder honing is necessary with regard to the correct running clearance and the surface roughness corresponding to the piston ring.For years...
Pistons CP - Project X - Forged Pistons. Top-class piston kit 77.00 mm, compression ratio 14:1.
CP - Forged pistons of the extra class 79.00 mm, + 2 mm oversize, compression 12.5: 1, 263 ccm. The piston is supplied with matching piston rings, pins and clips. The cylinder needs to be rebored and recoated.For years of construction 2004-2006.
CP - Forged pistons of the extra class 79.00 mm, + 2 mm oversize, compression 13,5 : 1, 263 ccm. The piston is supplied with matching piston rings, pins and clips. The cylinder needs to be rebored and recoated.For years of construction 2004-2006.
Pistons CP - Project X - Forged Pistons. Piston kit of the extra class 79.00 mm + 2 mm oversize, 263 ccm, compression 13.5: 1.
Piston TP kitCP Top End Piston Kit (piston + TP seal) 79mm bore +2mm oversize (263cc), 13.5:1,For years of construction 2004-2006
Piston TP kit CP Top End Piston Kit (piston + TP seal) 79mm bore +2mm oversize (263cc), 13.5:1,For years of construction 2007-2009
CP - forged pistons of the extra class 81.00 mm, + 4 mm oversize, compression 12.5: 1, 276 ccm. The piston is supplied with matching piston rings, pins and clips.New cylinder required!
CP - Project X - Forged Pistons. Piston kit of the extra class 81.00 mm + 4 mm oversize, compression 12.5: 1.
CP top end piston kit (piston+TP seal), 81mm bore +4mm oversize (276cc), 12.5:1For years of construction 2004-2006
CP Top End Piston Kit (Piston+TP-Gasket) 77mm std.bore (249cc), 13.5:1,For years of construction 2007-2009.
CP Piston Project X Platinum Kit (piston, gasket+rod), std.bore, 13.5:1, 1mm thinner gudgeon pin, connecting rod 1.5mm longerFor years of construction 2007-2009.
CP - Project X - Forged Pistons. Piston kit of the extra class 77.00 mm, compression 13.5: 1.
CP - Forged pistons of the extra class 77.00 mm, compression 13.5: 1. The piston is supplied with matching piston rings, pins and clips. The cylinder must be re-honed with special diamond honing stones. The cylinder honing is necessary with regard to the correct running clearance and the surface roughness corresponding to the piston ring.For years of...
Pistons CP pistons with skirt coating, 77mm std.bore (249cc), 14.2:1For years of construction 2007-2009.
Piston TP kit CP top end piston kit (piston+TP gasket), 77mm std.bore (249cc), 14.2:1For years of construction 2007-2009.
Pistons CP pistons with skirt coating, 77mm std.bbore (249cc), 13.5:1For years of construction 2010-2011
Piston TP kitCP top end piston kit (piston+TP gasket), 77mm std.bore (249cc), 13.5:1For years of construction 2010-2011
Pistons CP pistons with skirt coating, 77mm std.bore (249cc), 14.2:1For years of construction 2010-2011
Piston TP kit CP top end piston kit (piston+TP gasket), 77mm std.bore (249cc), 14.2:1For years of construction 2010-2011
CP Piston Project X Platinum Kit (piston, TP gasket+Carillo connecting rod), std.bore, 1mm thinner gudgeon pin/connecting rod 1.5mm longer, 14.0:1For years of construction 2010-2011
CP pistons with skirt coating, 80mm bore +3mm oversize (269cc), 13.5:1For years of construction 2004-2006
Piston TP kit CP top end piston kit (piston+TP seal), 80mm +3mm oversize (269cc), 13.5:1For years of construction 2004-2006
PROX - Piston 79.00mm. The pistons are supplied with matching piston rings, pins and clips. The cylinder must be re-honed with special diamond honing stones. The cylinder honing is necessary with regard to the correct running clearance and the surface roughness corresponding to the piston ring. For years of construction 2004-2006. Please indicate the size...
PROX - Piston 76,96 mm. The pistons are supplied with matching piston rings, pins and clips. The cylinder must be re-honed with special diamond honing stones. The cylinder honing is necessary with regard to the correct running clearance and the surface roughness corresponding to the piston ring. For years of construction 2007-2009. Please indicate the...
PROX - Piston 76,97 mm. The pistons are supplied with matching piston rings, pins and clips. The cylinder must be re-honed with special diamond honing stones. The cylinder honing is necessary with regard to the correct running clearance and the surface roughness corresponding to the piston ring. For years of construction 2007-2009. Please indicate the...
PROX - Piston 76,98 mm. The pistons are supplied with matching piston rings, pins and clips. The cylinder must be re-honed with special diamond honing stones. The cylinder honing is necessary with regard to the correct running clearance and the surface roughness corresponding to the piston ring. For years of construction 2007-2009. Please indicate the...
Cylinder Big BoreNew cylinder with standard bore 77.00 mm with piston and seal, 12.6:1For years of construction 2004-2006
Cylinder Big Bore New cylinder with standard bore 77.00 mm with piston and seal, 13.0:1For years of construction 2004-2006