YAMAHA MT-09 (RN87) 2024- MATRIS KIT CARTUCCIA IDRAULICA F25SA fork type...
YAMAHA MT-09 (RN87) 2024- MATRIS FORK CARTRIDGE F25R fork type Kayaba...
YAMAHA MT-09 (RN87) 2024- KIT CARTUCCIA IDRAULICA COMPLETA MATRIS F20K...
YAMAHA MT-09 (RN87) 2024- MATRIS HYDRAULIC FORK KIT FRK fork type...
YAMAHA MT-09 (RN87) 2024- MATRIS SPRING AND PRELOAD KIT FKS fork type...
YAMAHA MT-09 (RN87) 2024- MONOSHOCK MATRIS SERIE M46KF+HP (P6K flex-knob...
YAMAHA MT-09 (RN87) 2024- MONOSHOCK MATRIS SERIE M46KF (standard preload...
YAMAHA MT-09 (RN87) 2024- MONOSHOCK MATRIS SERIE M46KD+HP (P6K flex-knob...
YAMAHA MT-09 (RN87) 2024- MONOSHOCK MATRIS SERIE M46KD (standard preload...
LANCIA DELTA INTEGRALE 16v - LANCIA DELTA EVOLUZIONE - LANCIA DELTA 4WD...
HONDA NT 1100 / NT 1100 DCT (SC84) 2022-2024 MATRIS FORK CARTRIDGE KIT...
HONDA NT 1100 / NT 1100 DCT (SC84) 2022-2024 FORK CARTRIDGE KIT MATRIS...
Mercedes E-Class Cabrio Pre-facelift...
Camshaft Step 2. Your camshafts are re-profiled and surface-treated. Excellent in the middle and upper speed range. The camshafts sent must not be defective! Also available with timing chain wheels on request at an additional cost.
Camshaft Step 2. Your camshafts are re-profiled and surface-treated. Excellent in the middle and upper speed range. The camshafts sent must not be defective! Also available with timing chain wheels on request at an additional cost.
Tuning kitTuning kit stage 1, CP CARRILLO - piston 76 mm, compression 13.5: 1. The cylinder is honed with special diamond honing stones.
Tuning kit Tuning kit stage 2, CP CARRILLO - piston 76 mm, compression 13.5: 1. The cylinder is honed with special diamond honing stones.
Tuning kit Tuning kit stage 3, CP CARRILLO - Piston 76 mm, compression 13.5: 1. The cylinder is honed with special diamond honing stones.
Tuning kit Tuning kit stage 4, CP CARRILLO - Piston high quality CP - forged piston kit 77 mm. Incl. Drill out + 1 mm and 4-cylinder block coating.
Timing sprocketsTiming sprockets, see Tornado profile stage 1.
PistonCP CARRILLO - forged piston kit of the extra class 76.00 mm, compression 13.5: 1. The pistons are supplied with matching piston rings, bolts and clips. The cylinder must be honed with special diamond honing stones. The cylinder honing is necessary with regard to the correct running clearance and the surface roughness corresponding to the piston ring.
Piston CP CARRILLO - forged piston kit of the extra class 77.00 mm, + 1 mm oversize. The pistons are supplied with matching piston rings, bolts and clips. The cylinder must be drilled out and recoated.
Connecting rodHigh quality CARRILLO connecting rod, milled from a forging and tempered in a special hardening process. High-quality screws with extreme strength connect the two-part connecting rod. Low weight as an additional advantage for increasing engine speed in racing. Price per set.
Motor shaft4-cylinder crankshaft balancing, including alignment of connecting rods and pistons.
Timing chainHigh quality timing chain, 124 links, long service life, good running properties